Latest Blog Posts
Suresh Thapa
Part 7: Designing a Scalable Cisco Network Topology: HSRP for Redundant Gateway Configuration
High Availability is crucial in enterprise networks — especially at the default gateway level. If the gateway fails, devices in t…..
Suresh Thapa
Part 6: Designing a Scalable Cisco Network Topology: Inter-VLAN Routing with Layer 3 Switches Using SVIs
By default, VLANs on a switch are isolated from one another — devices in VLAN 10 can’t communicate with devices in VLAN 20 unless…..
Suresh Thapa
Part 3: Designing a Scalable Cisco Network Topology: VLANs and Trunk Links Between Switches
In this part, we will focus on segmenting the network using VLANs and establishing trunk links between switches to allow inter-sw…..
Suresh Thapa
VTP – VLAN Trunking Protocol on Cisco Switch
VLAN Trunk Protocol (VTP) reduces administration in a switched network. When you configure a new VLAN on one VTP server, the VLAN…..
Suresh Thapa
How to Configure Switch Virtual Interface (SVI) as a Layer 3 Interface on Cisco Switch
A Switched Virtual Interface (SVI) is a VLAN of switch ports represented by one interface to a routing or bridging system. There …..
Suresh Thapa
How to Configure VLANs and Trunk Ports on Juniper Switch
In this blog, we’ll walk through how to configure VLANs, Access Ports, and Trunk Ports on Juniper switches using JunOS CLI comman…..