Latest Blog Posts
Suresh Thapa
How to Build a Juniper EVPN-VXLAN Fabric: Test PCs & ESI Multihoming (Part 4)
Now in Part 4, we focus on: Connecting end devices (Test PCs/Servers) Configuring ESI Multihoming (Active-Active redundancy) T…..
Suresh Thapa
How to Build a Juniper EVPN-VXLAN Fabric: VXLAN & Anycast Gateway (Part 3)
This is where: VXLAN tunnels are formed VLANs are mapped to VNIs Distributed gateway (IRB) is enabled Inter-VLAN routing ha…..
Suresh Thapa
How to Build a Juniper EVPN-VXLAN Fabric: BGP EVPN Overlay (Part 2)
What is BGP EVPN Overlay? BGP EVPN replaces traditional flooding-based learning with a control-plane driven approach. Instead…..
Suresh Thapa
How to Build a Juniper EVPN-VXLAN Fabric: Underlay Network Design & Anycast Gateway (Part 1)
A Practical Guide Using Real-World Configurations Modern data centers rely on scalable, resilient Layer-2 extension across multi…..
Suresh Thapa
Juniper Switch Routed VLAN Interface (RVI) L3 Interface
Why Should I Use an RVI? In addition to providing communication between VLANs, an RVI binds specific VLANs to specific Layer 3 in…..
Suresh Thapa
How to Configure VLANs and Trunk Ports on Juniper Switch
In this blog, we’ll walk through how to configure VLANs, Access Ports, and Trunk Ports on Juniper switches using JunOS CLI comman…..