Latest Blog Posts
Suresh Thapa
How to Configure VLANs and Trunk Port on Cisco Switch
A VLAN is a group of devices on one or more LANs that are configured to communicate as if they were attached to the same wire, wh…..
Suresh Thapa
VLANs, Access and Trunking Ports on Cisco vs JunOS
Both Cisco IOS and Juniper JunOS, the operating systems for their respective networking devices, implement VLANs with similar cor…..
Suresh Thapa
Juniper Switch Routed VLAN Interface (RVI) L3 Interface
Why Should I Use an RVI? In addition to providing communication between VLANs, an RVI binds specific VLANs to specific Layer 3 in…..
Suresh Thapa
How to Configure VLANs and Trunk Ports on Juniper Switch
In this blog, we’ll walk through how to configure VLANs, Access Ports, and Trunk Ports on Juniper switches using JunOS CLI comman…..
Suresh Thapa
How to Configure DHCP Server on Juniper Router and Switch
Dynamic Host Configuration Protocol (DHCP) is a network protocol that enables a server to automatically assign an IP address to a…..
Suresh Thapa
How to Configure Console, AUX, Telnet, Enable, and Enable Secret Passwords on a Cisco Router
When setting up a Cisco router, it's essential to configure various passwords to secure different modes and access points. Here a…..